Welcome back to Planning Your Podcast. I'm Andrew McGivern, and today we're setting up your home recording studio. And I use the word studio very loosely, because for most of us, it's a corner of a room, a spare bedroom, or a closet with the door open. That's fine. A home studio doesn't have to look impressive. It has to sound good.

Let's start with the room itself. Choose the quietest room you can, and the smallest room that still feels comfortable. Big, empty rooms echo. Small rooms, with soft things in them — curtains, a rug, bookshelves, a bed — are naturally much kinder to your voice. If you can, record away from outside walls, away from fridges and furnaces, and away from anything that hums.

Next, your recording position. Sit or stand in the middle of the room if you can, not right up against a wall, because walls bounce sound back at the microphone. Put your microphone on a stand or an arm, so it's not picking up vibrations from the desk every time you move. And wear headphones while you record. That way, you'll actually hear what your microphone hears, including noises you might otherwise miss until you're editing.

Now, the recording chain, in plain language. You talk into the microphone. The microphone connects to something that turns your voice into a digital signal and that might be a USB connection straight to your computer, or an audio interface, or a portable recorder. Then your recording software captures it or you import it later. That's it. You don't need a complicated chain. Simple and reliable beats impressive and fragile, every time.

Before you record an episode, do a thirty-second test. Record yourself talking normally, listen back on headphones, and listen for three things: room echo, background noise, and mouth sounds. If you hear echo, add something soft to the room. If you hear noise, find it and switch it off, or move. If you hear harsh breathing or popping sounds, adjust the mic position, slightly off to the side. Another potential issue is static or artifact sounds and you have to trouble shoot what is causing those. It could be a bad cable connection or a light or some equipment causing interference. I had a light for recording video that if on caused a high pitch sound that took a while for me to figure out that it was causing the issue. I have two identical lights but only one of them causes the annoying sound.

It is much easier to fix before you record than to try and fix it in post production.

And here's a habit that will save you hours. Record in a consistent spot, with a consistent setup, every time. Same mic position, same room, same settings. Consistency means your episodes sound like they belong to the same show, and it means you're not troubleshooting your setup every single time you sit down to record.

But that isn’t always possible. If you don’t have a dedicated space available you may have to set up and break down your studio every time. Your significant other might not appreciate it if the coffee table or kitchen island becomes a permanent podcast studio.

Your takeaway today: pick your spot, do a thirty-second test, and fix the audio problems you hear if you can. Then you're ready to record.

Next time, we're going one step deeper on sound, with acoustic treatment, and why your room matters more than your gear. See you there.

Leave a Reply

Your email address will not be published. Required fields are marked *

13 − ten =